This page is under construction. Stay tuned~
The air unit supports video transmission up to 1080p/120 fps.
120 fps requires a compatible receiver unit, such as the Ascent VRX PRO.
The system does not impose a fixed distance limit. Actual flight range depends on the user’s configuration, environmental interference, and other factors.
No. Their hardware architecture and systems are not compatible. Only some accessories, such as antennas and coaxial cables, are compatible.
.img firmware file during an update? My computer says the image file is corrupted.The .img file is not intended to be opened on a computer. It must be copied to the device storage and used for the firmware update.
No.
This indicates that the air unit has not detected a camera signal. Check whether the coaxial cable or camera is faulty.
The air unit is designed to be installed on a Drone, where it receives continuous airflow for cooling during flight.
If it is installed on an RC car, an additional cooling fan is required.
No.
Not currently.
Yes.
No. Charging generates heat and may create a risk of damaging the battery.
The Ascent system does not currently support High Bitrate Mode.
The HD digital FPV system does not use a VTX table. Channels, transmit power, and other settings can only be changed through the goggles menu.
Same as above.