This page is under construction. Stay tuned~
- Although the connectors are identical, the coaxial cable used inside the gimbal is not wrapped with tape, as a taped cable cannot be installed properly inside the gimbal. GM1 is an exception.
- No. The two generations use different PC software.
- GM V2 uses CADDX PC Tool.
- GM Series gimbals support 19 mm digital FPV cameras from the Avatar and Ascent Series.
- Some 14 mm and analog cameras are also compatible, but additional adapter accessories are required.
- When using other cameras, the gimbal parameters may also need to be adjusted, as changes in camera weight will affect the center of gravity.
- If the Roll axis is tilted, connect the gimbal to CADDX PC Tool and perform a position calibration.
- If the Yaw axis is tilted, update the gimbal to the latest firmware version, at least V2.2.59. Then hold the gimbal by hand to ensure it is centered before performing a position calibration.
¶ Product Features and How They Work